Apply Now

Faculty


Pey Kin Leong
Pey Kin Leong

Associate Provost, Undergraduate Studies & SUTD Academy

PhD, National University of Singapore

Yeo Kiat Seng
Yeo Kiat Seng

Associate Provost, Research & International Relations
 
PhD, Nanyang Technological University
 


Ang Lay Kee, Ricky

Head, Science and Math, Acting Head of Pillar, Professor (EPD) and Ng Teng Fong Chair Professor for SUTD-ZJU IDEA
 
PhD,  University of Michigan


Low Hong Yee

Associate Head of Pillar (EPD), Associate Professor (EPD) and Director of the Digital Manufacturing and Design Centre (DManD)
 
PhD, Case Western Reserve University
 


Yang Hui Ying

Program Director (NEED), Associate Professor
 


Cai Kui

Associate Professor
 
Joint PhD, Technical University of Eindhoven, The Netherlands & National University of Singapore
 


Ngai-Man (Man) Cheung

Associate Professor
 
PhD, University of Southern California


Foong Shaohui

Associate Professor
 
PhD, Georgia Institute of Technology
 


Joel Yang

Associate Professor
 
PhD, Massachusetts Institute of Technology


Yuen Chau

Associate Professor
 
PhD, Nanyang Technological University
 


Zhao Rong

Associate Professor
 
PhD, National University of Singapore


Arief Suriadi Budiman

Assistant Professor
 
PhD, Stanford University
 


Mohan Rajesh Elara

Assistant Professor
 
PhD, Nanyang Technological University


Ge Qi, Kevin

Assistant Professor
 
PhD,  University of Colorado
 


Michinao Hashimoto

Assistant Professor
 
PhD, Harvard University


Desmond Loke

Assistant Professor
 
PhD,  National University of Singapore
 


Lu Wei

Assistant Professor
 
PhD, Singapore-MIT Alliance, National University of Singapore


Nagarajan Raghavan

Assistant Professor
 
PhD, Nanyang Technological University
 


Robert E Simpson

Assistant Professor
 
PhD, University of Southampter


Tan U-Xuan

Assistant Professor
 
PhD, Nanyang Technological University
 


Ye Ai

Assistant Professor
 
PhD, Old Dominion University


Teo Tee Hui

Senior Lecturer
 
PhD, Nanyang Technological University
 


Chen Zaichun, Herman

Lecturer

PhD,  National University of Singapore


Shubhakar Kalya

Lecturer
 
PhD,  Nanyang Technological University
 

Research Projects

Under the NEED programme, students are required to take on one of the following research projects (multiple project participation is not permitted) which will be jointly supervised by SUTD and CGU faculty. Students are advised to indicate their project preference when applying for the NEED programme.

AI Technologies for Intelligent Circuit Design
SUTD Faculty Research Project
Yeo Kiat Seng
kiatseng_yeo@sutd.edu.sg
Design of a low-voltage low-power millimeter-wave low noise amplifier (Design and optimisation)
Yeo Kiat Seng
kiatseng_yeo@sutd.edu.sg
Design of a high efficiency millimeter-wave power amplifier (Design and optimisation)
Yeo Kiat Seng
kiatseng_yeo@sutd.edu.sg
Design of a low-voltage low-power 60GHz phase-locked loop (Design and optimisation)
Yeo Kiat Seng
kiatseng_yeo@sutd.edu.sg
Design of a wideband low-power 60GHz voltage-controlled oscillator (Design and optimisation)
Yeo Kiat Seng
kiatseng_yeo@sutd.edu.sg
Reliability modeling of Ultra low power integrated circuit (Design and optimisation)
Yeo Kiat Seng
kiatseng_yeo@sutd.edu.sg
Degradation of high frequencies integrated circuits (Design and optimisation)
Ngai-Man (Man) Cheung
ngaiman_cheung@sutd.edu.sg
AI optimised for Digital Electronics (AI Circuits & Systems)
Desmond Loke
desmond_loke@sutd.edu.sg
Atomistic Design In Non-Volatile Memory (Design and optimisation)
Desmond Loke
desmond_loke@sutd.edu.sg
Large-Scale, Nano-Design In Non-Volatile Memory (Design and optimisation)
Teo Tee Hui
tthui@sutd.edu.sg
AI chip design (AI Circuits & Systems)
Teo Tee Hui 
tthui@sutd.edu.sg  
digital neuromorphic chip (AI Circuits & Systems)
Teo Tee Hui      
tthui@sutd.edu.sg
AI assist chip design (AI Circuits & Systems)
Zhao Rong 
zhao_rong@sutd.edu.sg
Low Power Memristive Device-based Artificial Synapse and Neurons (AI Circuits & Systems)
Zhao Rong 
zhao_rong@sutd.edu.sg
Cross-bar All-Memristive Artificial Neural Network Array for Brain-inspired Computation (AI Circuits & Systems)
Zhao Rong 
zhao_rong@sutd.edu.sg
Demo platform setup and Demonstration of Neuromorphic chip (AI Circuits & Systems)
Herman Chen
herman_chen@sutd.edu.sg
Microsphere Assisted Optical Scope for Failure Analysis (Smart materials and devices)
Herman Chen
herman_chen@sutd.edu.sg         
Super-Resolution Imaging Processing by Machine Learning (AI Circuits & Systems)
Herman Chen
herman_chen@sutd.edu.sg
Artifical Compound Eyes (Smart materials and devices)
Electronics for Robotics Control and Automation
SUTD Faculty Research Project
Mohan Rajesh Elara
rajeshelara@sutd.edu.sg
Optimal coverage path planning for service (AI Circuits & Systems)
Mohan Rajesh Elara       
rajeshelara@sutd.edu.sg 
Learning in multi-robot teams (Robotics and Automation/AI Circuits & Systems)
Mohan Rajesh Elara       
rajeshelara@sutd.edu.sg 
Expressive AI behaviors in sociable robots (Robotics and Automation/AI Circuits & Systems)
Foong Shaohui
foongshaohui@sutd.edu.sg
Development of a structural battery which also functions as an active aerodynamic surface of aerial craft   (Robotics and Automation)
Foong Shaohui
foongshaohui@sutd.edu.sg
Integrated electronics design for active sensing of aerodynamic performance in wings/rotors of aerial crafts (Robotics and Automation) 
Foong Shaohui
foongshaohui@sutd.edu.sg
Integrated electronics design for active actuation of aerodynamic performance in wings/rotors of aerial craft (Robotics and Automation) 
Yuen Chau
yuenchau@sutd.edu.sg
The design of IoT to support AI (AI Circuits & Systems)
Machine Learning Based Reliability Assessment
SUTD Faculty Research Project
Nagarajan Raghavan
nagarajan@sutd.edu.sg
Finite element modeling for temperature – moisture – electrical - mechanical (TMEM) stress effects on LEDs (Design and optimisation)
Nagarajan Raghavan
nagarajan@sutd.edu.sg
Pey Kin Leong
peykinleong@sutd.edu.sg
Physics of Failure (PoF) in Super-Capacitors (Smart materials and devices)
Shubhakar K
shubhakar@sutd.edu.sg
Pey Kin Leong
peykinleong@sutd.edu.sg
Investigation of Intrinsic Dielectric Breakdown Mechanism in Boron Nitride (Smart materials and devices)
Shubhakar K
shubhakar@sutd.edu.sg
Pey Kin Leong
peykinleong@sutd.edu.sg
Stochastic simulation on degradation behaviour in advanced devices (Design and optimisation)
Shubhakar K
shubhakar@sutd.edu.sg
TEM characterization of degradation mechanism in advanced devices (Data analysis and smart devices)
Data analytics and Electronics for Healthcare
SUTD Faculty Research Project
Robert Edward Simpson
robert_simpson@sutd.edu.sg
Biomolecule Sensing Surfaces (Smart materials and devices)
Yang Hui Ying
yanghuiying@sutd.edu.sg
Smart energy source for On-chip device (Smart materials and devices)
Yang Hui Ying
yanghuiying@sutd.edu.sg
Breath sensor network for health monitoring  (Smart materials and devices/Healthcare Engineering Design)
Yang Hui Ying
yanghuiying@sutd.edu.sg
Ultra-sensitive photon detector based on 2D photoelectric response materials  (Healthcare Engineering Design/Smart materials and devices)
Ye Ai
ye_ai@sutd.edu.sg
Development of High-throughput Cell Deformability Cytometer (Smart materials and devices)
Ye Ai
ye_ai@sutd.edu.sg
Mechanical Property based Acoustic Cell Sorter (Smart materials and devices)
Ye Ai
ye_ai@sutd.edu.sg
Development of a Microbial Enrichment Technique for Molecular Detection of Bloodstream Fungal Infection (Smart materials and devices)
IC Design with Advanced Manufacturing
SUTD Faculty Research Project
Michinao Hashimoto
hashimoto@sutd.edu.sg
Digital fabrication for bio-electronic devices (Advanced Manufacturing)
Michinao Hashimoto
hashimoto@sutd.edu.sg
Development of low-cost microfluidic devices for point-of-care diagnostics (Smart materials and devices)
Michinao Hashimoto
hashimoto@sutd.edu.sg
Rapid prototyping of 3D printed microfluidic devices as analytical tools (Advanced Manufacturing)
Ge Qi
ge_qi@sutd.edu.sg
Flexible Electronics by 3D Printing; (Advanced Manufacturing)
Ge Qi  
ge_qi@sutd.edu.sg
Wear Electronics by advanced manufacturing; (Advanced Manufacturing)
Ge Qi
ge_qi@sutd.edu.sg
Smart footwear by 4D Printing. (Advanced Manufacturing)
Ngai-Man (Man) Cheung
ngaiman_cheung@sutd.edu.sg
Data analytics for Bio-Medical Electronics (would the breath sensor analytics idea fit here?) (Healthcare Engineering Design)
Ngai-Man (Man) Cheung
ngaiman_cheung@sutd.edu.sg         
Failure Analysis for VLSI using Machine Learning (AI Circuits & Systems)
Smart Materials and Devices
SUTD Faculty Research Project
Arief Budiman
asbudiman@sutd.edu.sg
Mechanics and Reliability of Soft Materials - Enabling Next Generation Flexible and Stretchable Electronics (Smart materials and devices/Healthcare Engineering Design)
Arief Budiman
asbudiman@sutd.edu.sg
Advanced Materials for Enabling Robust and Reliable Internet of Things (LOT) and Smart Digital Nation (Smart materials and devices)
Cai Kui
cai_kui@sutd.edu.sg
Efficient Low-Density Parity-Check (LDPC) Coding Techniques for Flash Memories (Smart materials and devices)
Cai Kui       
cai_kui@sutd.edu.sg
Advanced Error Correction Coding Techniques for High-Speed high-Density Non-Volatile Memories (Smart materials and devices)
Joel Yang
joel_yang@sutd.edu.sg
Effect of localized electric fields on light incident or emitted from FINFETS for electrical fault isolation  (Smart materials and devices)
Joel Yang
joel_yang@sutd.edu.sg
FDTD/FEM simulation of FINFETs for investigation of Plasmonic effects (Design and optimisation)
Joel Yang
joel_yang@sutd.edu.sg
Fabrication and study of optical resonances on FINFET structures by optical spectroscopy (Advanced Manufacturing)
Ricky Ang
ricky_ang@sutd.edu.sg
Characterization of charge transport across an electrical contact of 2D materials (Experiment) (Smart materials and devices)
Ricky Ang  
ricky_ang@sutd.edu.sg
Characterization of 2D materials under the radiation environment (Experiment) (Smart materials and devices)
Ricky Ang
ricky_ang@sutd.edu.sg
Time-dependent non-equilibrium model of Plasmonic hot carrier generation and extraction (theory and modelling) (Smart materials and devices)

Research Facilities

Under the NEED programme, students will have access to cutting-edge research facilities in SUTD such as the Electronic Design Laboratory (EDL), an electronic design and innovation hub which supports research and design activities in the broad areas of electronic circuits and systems.

The EDL houses a high-performance wire bonding machine, a wedge bonder, a probe station, an oscilloscope, a spectrum analyzer and several workstations with EDA software as well as test and measuring equipment.

SUTD-CGU Dual Masters Programme